1

Name of the applicant applying for transmission open access on intra-state transmission system

2

Address for correspondence

3

Authorised Contact Person

1. Name
2. Designation
3. Phone Numbers
4. Fax
5. E-Mail

4

Authorised Person for scheduling

1. Name
2. Designation
3. Phone Numbers
4. Fax
5. E-Mail

5

Period for which Open Access required

1. From date
2. To Date
3. Period in months (nearest)

6

Details of power transfer requirement

1. Quantum of power to be transmitted (MW)
2. Peak load to be transferred (MW)
3. Average load to be transferred (MW)

7

Name(s) of Transmission Licensee(s) whose transmission network will be used for open access in intra-state transmission system

8

Furnish latest updated Power Map of Maharashtra showing shortest path of power flow from the point of injection to the point of drawal to be marked on it.

9

Details at injection point in intra-state transmission system

1. Name of injecting utility/party/generating station
2. Voltage Level
3. Point of injection (name of EHV Station of Transmission Licensee)
4. If power is injected at other than Transmission Licensee’s GSS, name and owner of S/S for O&M
5. Single line diagram at Injecting Point

10

Details at point of drawal from intra-state transmission system

1. Name of utility/party/generating station
2. Voltage Level
3. Point of drawal (name of EHV Station of Transmission Licensee)
4. Single line diagram at drawal Point

11

If power is drawn at other than Transmission Licensee’ S/S name and owner of S/S for O&M

12

Furnish details as below if intra-state transmission system open access is in conjunction with inter-state /inter-regional transmission open access

1. Name of injecting utility/party/generating station
2. Voltage Level
3. Point of injection (name of EHV Station where power is injected in inter-state Transmission system
4. Furnish CTU/RLDC approval for inter-state open access
5. Single Line Diagram at Injecting Point

13

Furnish details as below if open access in intra-state transmission system is in conjunction with distribution system

14

Details at injection point in distribution system

1. Name of Discom in whose distribution system power to be injected
2. Voltage Level
3. Point of injection (name of Distribution Sub-Station of Discom)
4. If power is injected at other than Discom’s sub-station name and owner of S/S.
5. Single line diagram at Injecting Point in Distribution system

15

Details at point of drawal in distribution system

1. Name of Discom in whose distribution system power to be drawn
2. Voltage Level
3. Point of drawal (name of Distribution Sub-Station of Discom)
4. If power is drawn at other than Discom’s sub-station name and owner of S/S.
5. Single Line Diagram at drawal Point in Distribution

16

Details of PPAs/Contracts and MOU

1. For Power to be injected
2. For power to be Drawn
3. For Balancing and Mismatch power requirement
4. For Inter-State Transmission Open Access if involved
5. Agreement with traders if any in above transaction

17

In case of injection through Generating Station not connected to Grid at present, furnish details

1. Name of the promoter
2. Generation Capacity
3. Location of the Generation plant
4. No. of Units & Capacity of each unit
5. Type of fuel
6. Base load station or peaking load station
7. If peaking load, then what is the estimated hours of running
8. If it is a hydro plant, then whether is it a Run of the river /Reservoir/ Multi-purpose / Pump storage
9. MU generation in an year in case of Hydro plant
10. Specify the step-up generation Voltage 400kV or 220kV or any other voltage
11. In case of Hydro Station, whether it is a identified project of CEA
12. Is it a captive Power Plant (Yes/No)
13. If Yes, details of utilization
14. Status of the Project: Existing/ Extension of existing Project/ New project

18

Bank Draft for Application Processing Fee

1. Name of Bank
2. Draft No. & Date
3. Amount
4. Payable at Bank